Surface Mounted Strain Gauge

Model：FT-YB1

Surface Mounted Strain Gauge The surface mounted strain gauge is used to measure the stress on the surface of an object and the temperature at the same time.

Embedded strain gauge

Model：FT-YB2

Embedded strain gauge adopts vibrating string elastic beam structure, which is suitable for long-term embedding in concrete structure and bedrock to monitor its stress and strain.

Rebar stress meter

Model：FT-GJ1

Rebar stress meter is used to monitor reinforcement stress in all concrete structures such as DAMS, Bridges, concrete pile foundations, cure-off walls, etc.

Anchor cable dynamometer

Model：FT-MS1

Anchor cable dynamometer is used for long-term monitoring of the anchorage state of hydraulic structures and other concrete structures, rock slopes, Bridges and other prestressed structures.

Axial force meter

Model：FT-ZL2

Axial force meter is a sensor used to measure the internal stress of a structure based on changes in vibration frequency to reflect changes in stress.

Earth Pressure Cell

Model：FT-TYL1

Earth Pressure Cell is an effective monitoring device to know the variation of earth pressure inside the measured structure. It can be embedded in soil or concrete for measurement.

Handheld vibrating string collector

Model：FT-CJ1

Handheld vibrating string collector converts the vibration frequency into the corresponding physical quantity, which is suitable for engineering detection and sensor installation.

Distributed data acquisition node

Model：FT-CJ2

Distributed data acquisition node is a multifunctional wireless data acquisition system using multiple communication interfaces.

Crack Detection Sensor

Model：FT-LF1

Crack Detection Sensor is used to monitor the change of crack width in real time, which can meet the requirements of distributed, real-time and continuous monitoring of cracks.

Vibrating string collector

Model：FT-CJ3

Vibrating string collector is a miniaturized data acquisition device suitable for a variety of vibrating string sensors, which can realize intelligent processing and transmission of collected data.

Crack monitoring system

Model：FT-LFZ1

Crack monitoring system is applied to the measurement of structural cracks in Bridges, tunnels, buildings, DAMS, electric power and other fields, and automatically collects the change data of structural crack width.

Bridge monitoring

Model：FT-QL1

Bridge monitoring main monitoring parameters include: stress-strain, static vibration, deformation displacement, perturbation and environmental monitoring parameters.