Radar life detector

1.Overall requirements for Radar life detector

Radar life detector is used to search and detect survivors buried by debris at rescue sites where flammable and explosive gases are present.

1.1 Comply with the "Radar life detector for Fire Protection" (XF 3010-2020) standard requirements*

1.2 Used to detect life in free space and penetrate non-metallic media.It is mainly used to detect and search human survivors buried in collapsed buildings, ruins, soil, etc.or to detect and search human life in smoke, fog and other environments..*

2.Radar life detector Parameter Performance Requirements

1.Detection type: It has two-dimensional positioning and detection function, can accurately locate the two-dimensional coordinates of the target, multi-dimensional display, and can obtain the three-dimensional coordinates of the living body.It has three-dimensional general imaging and three-dimensional posture recognition functions.▲

2.Detection distance: After penetrating the 65cm brick wall, ≥26m of stationary life and ≥36m of moving life can be detected.

3.Detection display: Automatically determine whether there are living organisms in the detection area, and display the detected stationary targets and moving targets in different graphics.

4.Detection opening angle: ≥120°.▲

5.Remote control distance: The wireless communication distance between the radar host and the control terminal in an open environment is ≥150 meters.▲

6.The detector has a multi-object detection function, which can detect the movement and breathing of ≥3 living organisms at the same time, and display it on the display control terminal.

7.Detection accuracy: radar detection accuracy ≥95%

8.Mode selection: You can select search modes for scenes such as air, ruins, and walls to achieve optimized detection.

9.Replaceable battery: The battery life of a single battery is not less than 12 hours, and the number of batteries is 2.

10.Working temperature: -20℃--+60℃.

11.The weight of the radar main unit (including battery) is ≤7.7kg.▲

12.Protection level ≥IP67.▲

13.The detector controls the terminal screen of the tablet ≥8 inches, and can view the data collected by the device in real time.▲

3.Other requirements for Radar life detector

1.Provide a nationally recognized third-party testing report at the provincial level (including) or above (the test report has CMA or CNAS mark) during bidding, and the test report reflects the above technical indicators with "▲".