Multi parameter Water Quality Monitor

1. Product introduction of Multi parameter Water Quality Monitor

1.Overview

Multi parameter Water Quality Monitor Multi parameter water quality monitor is applied to online monitoring of different water bodies such as tap water, surface water and groundwater.QSZ06Multi parameter Water Quality Monitor is a comprehensive sensor collection, display, and analysis system based on Internet of Things technology.It is a water supply water quality monitoring microsystem.It is composed of a steady flow exhaust unit, an analysis and test unit, a system control unit, and a remote communication unit.It has complete Power supply, lightning protection, network communication and other functions.

2.Product positioning

The QSZ06Multi parameter Water Quality Monitor has an automatic monitoring function.The main monitoring items of the integrated extraction micro water quality automatic monitoring station are: PH, temperature, turbidity, conductivity, dissolved oxygen, COD, ammonia nitrogen, suspended solids, total nitrogen, etc.It uses highly integrated technology to implement automatic water quality monitoring functions in a cabinet.

Multi parameter Water Quality Monitor can be widely used in online monitoring of water quality in rivers, urban or village water plants, tap water delivery pipe networks, secondary tap water supply, user terminals, indoor swimming pools, large water purification equipment and direct drinking water.It is an ideal product produced by water plants.Indispensable online analysis equipment in process control, water conservancy and water management, health supervision and other fields.

3.Functions and features

GPRS networking 4G

Support extended RJ45 networking

Support extended sensor remote transmission

Support LED screen display 7.0-inch touch control screen

Support expanding Android screen display and storage

Extended Android screen supports 2G data storage and U disk data export

Supports one RS485 modbus-RTU protocol slave station

Supports multi-channel RS485 modbus-RTU sensor expansion

Supporting IoT data display, storage and analysis platform

The platform supports data forwarding of multiple protocols such as TCP short link and HTTP protocol.

2.Multi parameter Water Quality Monitor system composition

The water supply quality monitoring microsystem consists of a power supply unit, a water pump control unit, an analysis and testing unit, a display unit, a water pump unit, a remote communication unit and an integrated box main unit.

1.Power supply unit

Power supply AC220V.

2.Water pump control unit

Intelligent self-priming pump maximum lift: 25m opening flow: 1.8m3/h

3.Analyze the test unit

The analytical test unit is mainly composed of pH, dissolved oxygen, conductivity, turbidity, ORP, and temperature sensors, which are fixed on the flow cell through threads or tight-fitting fixtures.The main parameters of the sensor are as follows:

Note: The sensor cannot be installed upside down or horizontally.It must be installed at an angle of at least 15 degrees.The working environment of the above water quality sensor is 0-50℃, <0.3Mpa.

4.Display unit

The multi-parameter monitor is installed at the cabinet door to perform data collection, analysis, display, communication and data storage operations.

Android version: 4.4.2·CPU: Quad-core Cortex™-A7·RAM/ROM: 512M/4G·Screen: 7-inch capacitive touch screen·Power supply: 12V/1A·Supports U disk expansion and memory card expansion

5.Remote communication

RS485 interface MODBUS-RTU communication protocol Factory device address 6 decimal supports 03 function code to read data

6.Equipment box main unit